ONU (Optical Network Unit)

ATS Wireless ONU

ONU ATS-ONU
  • Full speed 1G
  • 2048 MAC address table
  • Integrated IEEE802.1p QoS
  • Ethernet ports (AUTO MDIX)
  • Integrated port monitoring
ATSW-ONU ATS ONU

    Technical Specification

  •    ★ Main service: 1GE
  •    ★ Plug and play, integrate auto detection, auto configuration and auto firmware upgrading
  •    ★ Integrate TR-069 remote configuration and maintenance
  •    ★ Support diagnostic monitoring and remote disabling of fiber optical
  •    ★ Compatible with Huawei, ZTE and Fiberhome OLT
Technical Specification                                                                         Descriptions
Fiber port 1 EPON interface, SC single-mode/single-fiber, Downstream rate 1.25Gbps, Upstream rate 1.25Gbps
Wavelength Tx 1310nm, Rx 1490nm
Fiber interface SC/PC
RX sensitivity <-28dBm （1490nm）
WLAN IEEE802.11b/g/n，300Mbps, a built-in antenna
 LAN 1*10/100/1000Mbps adaptive Ethernet ports, full/half duplex, RJ45 interface
  Throughput Throughput can reach 900Mbps or more
POTS 1*FXS, RJ11 connector
   DC power 12V 1A, external AC-DC power adapter
Button Reset, power
Power ≤8W
  Operation Working temperature: -5〜+55℃  working humidity:10〜90％(non-condensation)
   Storage Storage temperature: -30℃〜+60℃ storage humidity: 10〜90％(non-condensation)
  Dimension 130*105*30mm(length*width*height)
  Net weight ≤0.2Kg

Reverse PoE Switch with Fiber Port & DC-DC PoE

Reverse PoE with Fiber Port inwall AP
  • Fiber Port UPLINK A : - 1310/1550
  • Fiber Port UPLINK B : - 1550/1310s
  • Power In from Ethernet :12 to 48V DC
  • Power In from DC Socket:12 to 48V DC
  • Number of Ethernet ports: 6+2Fiber
Reverse PoE with Fiber Port inwall AP
  • Number of Fiber Ports : 1
  • Fiber Port UPLINK B : 1550/1310s
  • Power In from Ethernet :12 to 48V DC
  • Power In from DC Socket:12 to 48V DC
  • Number of Ethernet ports: 7
DC48V-DC24V Poe WR1505N3
  • RJ45 PoE Port 1*10/100Mbps Auto NG
  • RJ45 Lan Port: 1*10/100Mbps Auto NG .
  • Power Output:DC 24V up to 30W PoE port
  • LEDs:1*Power LED /1*Device Connected
  • Standard :IEEE 802.3, IEEE 802.3u
DC12V-DC12V Poe WR1505N3
  • RJ45 PoE Port 1*10/100Mbps Auto NG
  • RJ45 Lan Port: 1*10/100Mbps Auto NG .
  • Power Output:DC 12V up to 15W PoE port
  • LEDs:1*Power LED /1*Device Connected
  • Standard :IEEE 802.3, IEEE 802.3u

Point To Point 5Ghz Device

ATSW-1000i-AN inwall AP
  • 300Mbps 2T2R
  • 10/100 1Lan/1Wan Port
  • Mode AP/Gateway/Wisp/Bridge
  • 16dBiIntegrated Antenna
  • 24VoltPoE
ATSW-1000e-AN inwall AP
  • 300Mbps 2T2R
  • 10/100 1Lan/1Wan Port
  • Mode AP/Gateway/Wisp/Bridge
  • External Antenna
  • 24VoltPoE
ATS-1000e-AN-Metal inwall AP
  • 300Mbps 2T2R
  • 10/100 1Lan Port
  • Mode AP/Gateway/Wisp/Bridge
  • External Antenna
  • MetalEnclosure
Binatone CPE500 5.8Ghz PCBA
  • 300Mbps 2T2R
  • 10/100 1Lan+1Wan Port
  • Mode AP/Client/Wisp/Bridge
  • Antennna 5Ghz 13dBi
  • 24VoltPoE

CPE (Customer Premises Equipment)

2.4Ghz Bottle Type CPE CPE Box
  • 150Mbps 1T1R
  • Super Channel &Normal
  • Mode AP/Gateway/Wisp/Bridge
  • 14dBi Antenna
  • Bottle Type2.4 CPE Enclosure
2.4Ghz Flate Type CPE inwall AP
  • 150Mbps 1T1R
  • Super Channel &Normal
  • Mode AP/Gateway/Wisp/Bridge
  • 14dBi Antenna
  • Flate Type2.4 CPE Enclosure
PCBA 2.4Ghz PCBA
  • 150Mbps 1T1R
  • 10/100 4Lan/1Wan Port
  • Mode AP/Gateway/Wisp/Bridge
  • Super Channel &Normal
  • 12VoltAdapter
Binatone CPE500/CPE200 5.8G/2.4G PCBA
  • 300Mbps 2T2R
  • 10/100 1Lan+1Wan Port
  • Mode AP/Client/Wisp/Bridge
  • Antennna 5Ghz 13dBi &2.4Ghz 9dBi
  • 24VoltPoE

24/7 Technical Support

phone:   +91-9910903898    Email:   support@atswireless.in

Send Query

© Copyright 2016 ATS Wireless Solutions